Product image for Bosch 10 Bar Bränsle / Oljetrycksgivare M10x1.0

Produktinformation

Bosch 10 Bar Bränsle / Oljetrycksgivare M10x1.0

1 390 kr

Beställningsvara 4-5 Arbetsdagar

Produktinformation

A high-quality pressure and temperature sensor from Bosch, with an M10x1 male thread.
A well-known and popular fuel and oil temperature and pressure sensor from Bosch.

Not meant to be used on the Nuke Performance FPR100 series, for those regulators, you need a 1/8 NPT thread.

Data of temperature sensor

Specified temperature range: -40 to +140°C
Operating voltage: Operation with a 3.16 k series resistor at 5 V in the control unit
Nominal resistance at 20 °C: 2.482 k 4.7 % (new part)
Temperature response time 63 in oil bath : 9 s

Pin out
Pin 2 Sig
Pin 3 Us
Pin 4 GND
Pin 5 NTC / Temp

This sensor can be connected directly to most control units. For temperature measurement please use a pull-up resistor with an optimal value of 4.6 kOhm.

Disclaimer:
This is not a Nuke Performance official product, this is only available as an accessory to their product range. Can not be fitted to the Nuke Performance fuel pressure regulators, then you need a sensor with a 1/8 NPT thread instead.

Quantity:
1pc
  • Artikelnummer

    NUKE-70-0261230340

  • Produkttyp

    Universal

Nuke Performance

Nuke Performance

Nuke Performance AB är ett svenskt företag grundat 2004 som specialiserar sig på att utveckla, designa och tillverka högpresterande komponenter för alla typer av motorsport. Företaget bygger på gedigen ingenjörskompetens och en stark passion för prestanda, vilket märks i deras innovativa produkter där funktion, kvalitet och tillförlitlighet står i centrum.

All utveckling och produktion sker i Sverige, vilket ger Nuke Performance full kontroll över hela processen, från idé till färdig produkt. Sortimentet omfattar bland annat bränslesystem, oljesystem och motorsportanpassade komponenter, utvecklade för bilentusiaster över hela världen.